Raspberry Pi 4 Model B with 2GB Ram Starter Kit

Raspberry Pi 4 Model B 2GB Ram Starter Kit contains Raspberry Pi 4 Model B 2GB Ram Board and all the accessories available for it. It is specially designed for the users to get more benefit and in cheaper price. It is the best kit for anyone who is starting out working on Raspberry Pi 4 Model B 2GB Ram version.

Kit Contains:-

1. Raspberry Pi 4 Model B 2GB Ram Board.
2. Official Raspberry Pi 4 Case.
3. Raspberry Pi 4 USB-C Official Power Adapter – 5.1V – 3 Amp.
4. Micro HDMI Male To HDMI Female Adaptor for Raspberry Pi 4.
5. HDMI male to HDMI male cable – 1.5m.

The Raspberry Pi 4 is the latest product in the Raspberry Pi range, boasting an updated 64-bit quad core processor running at 1.4GHz with built-in metal heatsink, USB 3 ports, dual-band 2.4GHz and 5GHz wireless LAN, faster (300 mbps) Ethernet, and PoE capability via a separate PoE HAT.

This version comes with 2GB of RAM, but we also have versions with 1 and 4 GB if you like.

Pi 4 B is upgraded with Latest High-Performance Quad-Core 64-bit Broadcom 2711, Cortex A72  processor clocked at 1.5GHz speed. Which is designed to use 20% less power or offer 90% greater performance than its old version. Hardware upgrade on Pi4 developed for more faster performance not only the loading time with all new 1GB/2GB and 4GB LPDDR4 SDRAM variants but also in connectivity with Dual-band 2.4GHz and 5GHz, 802.11 b/g/n/ac wireless LAN and PoE capability via a separate PoE HAT. Addition to it USB 3.0, improve the transfer speed by 10x than USB 2.0 to provide you significantly faster true Gigabit internet experience.

Though the Pi 4 has type C USB port for 5V 3A input power capacity, new Hardware on Pi 4 even required less power than the previous versions therefore old power adapter can provide plenty of power to the chip, Ethernet, and any USB add-ons you plug in on board.

With upgraded hardware of Pi 4, you can still use all your favourite Raspbian or PIXEL software with this update. You must make sure to upgrade your Raspbian operating system install to the latest version so that the firmware can support the new chips! Old SD cards from previous releases will not work without an upgrade!

Specifications :-

• Model-Raspberry Pi 4 Model-B
• Processor- Broadcom BCM2711, quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
• RAM Memory – 2 GB LPDDR4 SDRAM
• Connectivity:-

1.  2 × USB 2.0 Ports
2.  2 × USB 3.0 Ports
3.  2.4 GHz and 5.0 GHz IEEE 802.11b/g/n/ac wireless LAN, BLE Gigabit Ethernet Bluetooth 5.0

• Operating Power:-

1.  5 Volt 3 Ampere DC via GPIO Header
2.  5 Volt 3 Ampere DC via USB Type-C Connector
3.  Power Over Ethernet (PoE)–Enabled (requires separate PoE HAT)

•  GPIO- (Fully backward compatible with previous boards)
• Multimedia:- 

1.  H.264 (1080p60 decode, 1080p30 encode);
2.  H.265 (4Kp60 decode);
3.  OpenGL ES, 3.0 Graphics

• Video and Sound:-

1.  2 × micro HDMI ports (up to 4Kp60 supported)
2.  2-Lane MIPI CSI Camer a Port
3.  2-Lane MIPI DSI Display Port
4.  4-Pole Stereo Audio and Composite Video Port

• Clock Speed- 1.5 GHz
• Micro-SD Card Slot- Yes (FAT32 format), support maximum 32G Micro SD Card Memory Features
• Operating Temperature Range- 0ºC to 50ºC

* product image for illustration purposes only. actual product may vary.