PIC12F675 Microcontroller – (SMD Package)

99.00 Excluding tax

The PIC12F675 is a 8-Pin, Flash-Based 8-Bit CMOS Microcontrollers. This powerful (200 nanosecond instruction execution) yet easy-to-program (only 35 single word instructions) CMOS Flash-based 8-bit microcontroller packs Microchip’s powerful PIC® MCU architecture into an 8-pin package and features 4 channels for the10-bit Analog-to-Digital (A/D) converter, 1 channel comparator and 128 bytes of EEPROM data memory. This device is easily adapted for automotive, industrial, appliances and consumer entry-level product applications that require field re-programmability.

Features:-

1. High-Performance RISC CPU:

• Only 35 Instructions to Learn – All single-cycle instructions except branches

• Operating Speed: – DC – 20 MHz oscillator/clock input – DC – 200 ns instruction cycle

• Interrupt Capability

• 8-Level Deep Hardware Stack

• Direct, Indirect, and Relative Addressing modes

2. Special Microcontroller Features:

• Internal and External Oscillator Options – Precision Internal 4 MHz oscillator factory calibrated to ±1% – External Oscillator support for crystals and resonators

• Power-Saving Sleep mode

• Wide Operating Voltage Range – 2.0V to 5.5V

• Industrial and Extended Temperature Range

• Low-Power Power-on Reset (POR)

• Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)

• Brown-out Detect (BOD)

• Watchdog Timer (WDT) with Independent Oscillator for Reliable Operation

• Multiplexed MCLR/Input Pin

• Interrupt-on-Pin Change

• Individual Programmable Weak Pull-ups

• Programmable Code Protection

• High Endurance Flash/EEPROM Cell

– 100,000 write Flash endurance

– 1,000,000 write EEPROM endurance

– Flash/Data EEPROM Retention: > 40 years

3. Peripheral Features:

• 6 I/O Pins with Individual Direction Control

• High Current Sink/Source for Direct LED Drive

• Analog Comparator module with:

– One analog comparator

– Programmable on-chip comparator voltage reference (CVREF) module

– Programmable input multiplexing from device inputs

– Comparator output is externally accessible

• Analog-to-Digital Converter module (PIC12F675):

– 10-bit resolution

– Programmable 4-channel input

– Voltage reference input

• Timer0: 8-Bit Timer/Counter with 8-Bit Programmable Prescaler

• Enhanced Timer1:

– 16-bit timer/counter with prescaler

– External Gate Input mode

– Option to use OSC1 and OSC2 in LP mode as Timer1 oscillator, if INTOSC mode selected

• In-Circuit Serial Programming TM (ICSPTM) via two pins

specifications:-

Program Memory Type                                            Flash
Program Memory Size (KB)                                     1.75
CPU Speed (MIPS/DMIPS)                                         5
SRAM (B)                                                                   64
Data EEPROM/HEF (bytes)                                        128
Timers                                                                      1 x 8-bit, 1 x 16-bit
Number of Comparators                                         1
Temperature Range (°C)                                         -40 to 85
Operating Voltage Range (V)                                  2 to 5.5
Pin Count                                                                 8

* product image for illustration purposes only. actual product may vary.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “PIC12F675 Microcontroller – (SMD Package)”

There are no reviews yet.