Waveshare 0.96 Inch OLED Display (B) Module

This is a Waveshare 0.96 Inch OLED Display (B) module. It is a very high-contrast display with no backlight. It is perfect when you need an ultra-small display. This module supports SPI/I2C communication interfaces. It supports various hardware platforms such as Raspberry Pi/Jetson Nano/Arduino/STM32.

Comparing to LCD, OLED screens are way more competitive, which has a number of advantages such as high brightness, self-emission, high contrast ratio, slim outline, wide viewing angle, wide temperature range, and low power consumption. This module provides 3 kinds of driver interfaces; they are 3-wire SPI, 4-wire SPI, and I2C interface.

Pin Definition:

1.GND: Power ground
2.VCC: Power positive
3.SCL: Serial Clock Line
4.SDA: Serial Data wire

Features:

1. Better quality
2. The IIC address can be changed, it is convenient to use with different machines.
3. Four square holes are easy to install

specifications:-

Driver Chip                                 SSD1306
Interface                                     3-wire SPI, 4-wire SPI, I2C
Resolution                                  128 x 64
Display Size                                0.96 Inch
Colors                                        1/4 yellow section, 3/4 blue section
Visible Angle                              >160
Operating Temperature(°C)       -20~70
Storage Temperature(°C)           -30~80
Operating Voltage                     3.3V / 5V
Length (mm)                              33
Width (mm)                               33
Height (mm)                              3
Weight (gm)                              5

* product image for illustration purposes only. actual product may vary.