0.96 Inch I2C/IIC 128×64 OLED Display Module 4 Pin – Blue Color

OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays and is regarded as the ultimate technology for the next generation of flat-panel display

This 0.96 Inch I2C/IIC 4pin OLED Display Module BLUE can be interfaced with any microcontroller using SPI/IIC/I2C protocols. It is having a resolution of 12864. The package includes display board, display, 4 pin male header pre-soldered to board.

OLED monochrome 12864 dot matrix display module. The characteristics of this display module are high brightness, self-emission, high contrast ratio, slim/thin outline, wide viewing angle, wide temperature range and low power consumption.

Interface pin for 4 PIN 128×64 OLED

1. VCC: 3.3 volts 5 Volts
2. GND: Ground
3. SCL: Serial Clock
4. SDA: Serial Data

Features:

1. Super High Brightness (Adjustable)
2. Super High Contrast (Adjustable)
3. Embedded Driver/Controller
4. Display size: 0.96
5. Resolution radio:128 x 64
6. Interface modes: I2C/IIC
7. working voltage: 3.3V
8. Control Chip: SSD1306

specifications:-

Display Size                                       0.96 Inch
Pixel Colour                                        Blue
Resolution                                        128 x 64 Pixels
Active Display Area                          21.74 x 10. 86mm
Driving Voltage                                3.3-5V
Operating Temperature                  -40~70 Celsius
Interface Type                                  I2C IIC
Length (mm)                                    27.5
Width (mm)                                     27.5
Height (mm)                                     11
Weight (gm)                                      7

* product image for illustration purposes only. actual product may vary.